|02-03-2011, 09:57 AM||#1|
Join Date: Aug 2010
Location: Fuquay Varina, NC
Blade mCP X
Finally from HH, a micro CP heli:
Available as BNF and RTF:
Integrated flybarless unit increases stability, control and power, providing the user the ultimate ultra-micro heli experience for indoor and outdoor use.
Capable of maneuvers such as inverted hover, loops, flips, rolls, funnels, and hurricanes.
Very low discloading results in high maneuverability and good collective response.
Lightest heli in its class.
Two sets of blades included, fast-flight and high-performance.
Robust, long-lasting dual-ball bearing supported linear cyclic servos.
Two high-performance flight batteries included.
This helicopter will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Not to mention the cost makes it much more economical when learning.
It comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM2 receiver, ESCs, and gyros. A ready-to-fly version with 2.4GHz DSM2 transmitter and a Bind-N-Fly version without transmitter, for those who already own a DSM2 aircraft transmitter, are available. Both variations include two 1S 200mAh 25c batteries, single port charger with AC adapter and a 1s High Current Ultra-Micro Battery Adapter Lead.
Using an integrated Flybarless system, the heli to gets up in the air without a mechanical flybar. The benefits of this system provides reduced drag on the main rotor head which results in more power, longer flight times, and provides the pilot the best of both worlds between stability and agility.
The Bind-N-Fly mCP X comes assembled with everything you need to fly in the box except a transmitter. Just charge the battery and bind the helicopter to any DSM2 compatible aircraft transmitter, and you'll be flying in no time.
Type: Ultra Micro Collective Pitch Helicopter
Main Rotor Diameter: 9.65 in (245mm)
Tail Rotor Diameter: 1.40 in (36.5mm)
Gross Weight: 1.60 oz (45.5g)
Length: 9.25 in (235mm)
Control System: Flybarless
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Indoor/Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: No
|06-23-2011, 10:12 AM||#4|
Join Date: Jun 2011
I've had one for about 4 months now and Love it...the grommet mod worked great..and this sucker can take some abuse! HobbyKing is now offering 300mah Nano-tech lipos for it and i have 2 and they have really good power...and if you use a buddy code from RCG they can be as cheap as $2...worth it for sure...
|06-23-2011, 10:46 AM||#5|
Join Date: May 2009
Location: United States, NC, Clyde
Broke the elevator ball off the swash on mine down for parts - $2 part $5 shipping lol (just kidding havent looked at the $$$ yet)