Discussion Heli-Max Axe 100 CP - Review!

CSpaced · 01-12-2013, 07:39 PM

I've got another published review to share with you, this time it's the Axe 100 CP from Heli-Max!

Introduction:

The Axe 100CP from Heli-Max is a micro sized, fully aerobatic helicopter. Using micro servos, “TAGS” flybarless technology, and an efficient layout, it can handle even the most complicated of 3D maneuvers. It is available as a ready to fly package, with an included transmitter, or as a TxR (transmitter ready) version. For this review I’ll be looking at the TxR version, using the AnyLink adapater with my Futaba 8FGS.

In the Box:

The Axe 100 CP comes in a small box, packaged in a blister pack. This TxR version features smaller packging than the RTF version, making it very easy to carry it around with you. There really isn’t too much to the packaging, it’s simple and compact, and holds everything you need.

Check out the full review at the link below!

Heli-Max Axe 100 CP Review

jwheli · 01-24-2013, 11:51 PM

For some reason I can not get my 10c to link to the new Axe cp 100.
One thing in the anyLink structions it said to put the Tx into PPM mode.
I can't find anywhere to do that in the setup of the 10c.
Any help would be welcomed. Oh and I have been pushing the button
on the cp board but the ligqht never turns solid.

skaluf · 01-25-2013, 10:35 AM

You are only going to find the PPM mode in the 10C not the 10CG. Which do you have? The 10C has the module on the back of the transmitter.

If you have the CG, with the AnyLink plugged in and the transmitter powered up, do you get the green LED on the AnyLink and a single beep from the AnyLink?

Steve

Quote:

Originally Posted by jwheli

For some reason I can not get my 10c to link to the new Axe cp 100.
One thing in the anyLink structions it said to put the Tx into PPM mode.
I can't find anywhere to do that in the setup of the 10c.
Any help would be welcomed. Oh and I have been pushing the button
on the cp board but the ligqht never turns solid.

jwheli · 01-25-2013, 03:24 PM

Oh I have the 10CGH and no module.

The Anylink is plugged in and yes I got the beep when I first turned it on and the green light. Then after that, when I now turn on the TX I get the green light but no beep form the AnyLink. Is this okay?

jwheli · 01-25-2013, 11:34 PM

Quote:

Originally Posted by jwheli

Oh I have the 10CGH and no module.

The Anylink is plugged in and yes I got the beep when I first turned it on and the green light. Then after that, when I now turn on the TX I get the green light but no beep form the AnyLink. Is this okay?

I figured out what was happening. the plug that goes into the TX was in and the light lite but the signal was not there. I push the plug in a little harder and when it clicked in I had the link.
Now if I can just get it programed with the 10cgh I will be happy. Looking for anyone who has some settings on a 10chg for the CP 100.

Flyfalcons · 03-05-2013, 02:13 PM

So Hobby King is now stocking Turnigy Nano-Tech 300mah batts that fit the Axe 100 perfectly. I ordered four of them and tried them out yesterday. They are awesome! They are slightly heavier than the stock 200mah batteries but they have great power that lasts the entire flight, and additionally the flight time is up by a noticeable amount. Lovin' the 100!

01-12-2013, 07:39 PM	#1
CSpaced Spam Killer! Join Date: Aug 2008 Location: Oak Ridge, NC Posts: 2,556	Heli-Max Axe 100 CP - Review! I've got another published review to share with you, this time it's the Axe 100 CP from Heli-Max! Introduction: The Axe 100CP from Heli-Max is a micro sized, fully aerobatic helicopter. Using micro servos, “TAGS” flybarless technology, and an efficient layout, it can handle even the most complicated of 3D maneuvers. It is available as a ready to fly package, with an included transmitter, or as a TxR (transmitter ready) version. For this review I’ll be looking at the TxR version, using the AnyLink adapater with my Futaba 8FGS. In the Box: The Axe 100 CP comes in a small box, packaged in a blister pack. This TxR version features smaller packging than the RTF version, making it very easy to carry it around with you. There really isn’t too much to the packaging, it’s simple and compact, and holds everything you need. Check out the full review at the link below! Heli-Max Axe 100 CP Review Attached Thumbnails 31.6 KB · Views: 679 __________________ Chris Mulcahy

01-24-2013, 11:51 PM	#2
jwheli Coaxial Join Date: Jan 2013 Posts: 3	cp 100 no link For some reason I can not get my 10c to link to the new Axe cp 100. One thing in the anyLink structions it said to put the Tx into PPM mode. I can't find anywhere to do that in the setup of the 10c. Any help would be welcomed. Oh and I have been pushing the button on the cp board but the ligqht never turns solid.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discussion New from Heli-Max: AXE 100 CP	CSpaced	Main Blade	1	09-10-2012 11:46 AM
Helimax New Release: Heli-Max® Axe™ CX Nano 2.4GHz EP Heli RTF	Sleepyc	Beginners	0	10-25-2010 02:11 PM
Heli-Max Axe CPv3	yellowman2513	Electric Helicopters	3	01-07-2009 02:49 PM
Heli-Max Axe CPv3 questions	DismayingObservation	Electric Helicopters	0	10-07-2008 08:29 PM

01-25-2013, 03:24 PM	#4
jwheli Coaxial Join Date: Jan 2013 Posts: 3	Oh I have the 10CGH and no module. The Anylink is plugged in and yes I got the beep when I first turned it on and the green light. Then after that, when I now turn on the TX I get the green light but no beep form the AnyLink. Is this okay?

03-05-2013, 02:13 PM	#6
Flyfalcons Fixed Pitch Join Date: Nov 2010 Posts: 34	So Hobby King is now stocking Turnigy Nano-Tech 300mah batts that fit the Axe 100 perfectly. I ordered four of them and tried them out yesterday. They are awesome! They are slightly heavier than the stock 200mah batteries but they have great power that lasts the entire flight, and additionally the flight time is up by a noticeable amount. Lovin' the 100!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)