Spookyeng
09-06-2008, 05:59 AM
Hi guys,
I am putting up my TREX 700 up for sale. The only reason I am selling is I want to move into large scale and turbine helicopters and a gasser is my next step and need to help fund a new project. The helicopter has 2 gallons on it since the build was complete. Everything was bought new for the helicopter when built. This is a first production run helicopter and the links are straight and the helicopter assembled well. The helicopter has never been crashed and I do not fly 3D.
The pictures show the helicopter in its current ready to fly stage. NOT ALL ITEMS ARE INCLUDED WITH THE SALE PLEASE SEE THE LIST BELOW.
ITEMS INCLUDED WITH THE HELICOPTER….
TREX 700
YS91ST (2 gallon through it and the break-in was just finished )
Hatori SB-16 Todd Bennett special pipe
Youngblood 710 radix blades
Youngblood Stubz paddles (NIP and not pictured)
Switchglo remote igniter
2 sets of landing gear skids (NIP and not picutured)
1 set skid pipe (NIP and not pictured)
New torque tube (NIP and not pictured)
Youngblood swash leveler for the TREX 700
Original Align Governor (I used the magnets with the GV-1)
GV-1 magnetic pickup (I don’t want to remove it, 97% magnet pickup)
Custom carbon fiber radio tray
4-40 hardware for all servos
THE FOLLOWING ITEMS ARE NOT INCLUDED WITH THE SALE, I AM GOING TO REMOVE THEM ONCE THE HELICOPTER SELLS...X4 BLS451 SERVOS, 611 GYRO AND SERVO, GV-1 CONTROL AMP, THUNDER POWER BATTERY, SG REACTOR-X, AND RECEIVER.
There are a few flaws with the helicopter canopy. The canopy has a few light scratches (they are very minor). The canopy mounting holes were drilled incorrect and I needed to space out one of the mounting posts to keep the canopy from rubbing on the main gear. When the canopy is installed it has a slight bow in the middle. More of a visual bother than anything else. I did use 4-40 hardware to mount all the servos, the holes were drilled and tapped. I did not like the stock screws that were included. Other than that the helicopter is in near perfect, new condition!
I am asking $1350.00 OBO for all items included with the sale. I really do not want to ship but I will if need for the sale, buyer pays shipping. I will meet to up to the following places to help deliver, Tallahasse to the East, Mobile to the West, and Montgomery to the North. I don’t know what shipping would be but I can check into it. Probably in two boxes would be the best way. I prefer PayPal and will cover the fees for this sale. If you have any question please let me know, my phone is 850-525-8012.
This is my first post on this site but please check RR and helifreak for feedback and deal with confidence.
Free fuel if picked-up or delivery exchange.
I will also included 4 gallons of new fuel if the helicopter is picked-up or delivery exchage within the area specified obove. I will not ship the fuel unless the person/buyer wants to pay for the actually shipping charges. But I would include it with any shipped deal provided the buyer pays shipping and any fees for hazmat. $92.00 of free fuel.
I have 3 gallons of Wildcat 30% YB and 1 gallon of Coolpower 30% heliblend. The YS has been flown on the YB 30% so the motor is tuned for that fuel. The fuel has been stored indoors for the couple of moths I have had it.
I am putting up my TREX 700 up for sale. The only reason I am selling is I want to move into large scale and turbine helicopters and a gasser is my next step and need to help fund a new project. The helicopter has 2 gallons on it since the build was complete. Everything was bought new for the helicopter when built. This is a first production run helicopter and the links are straight and the helicopter assembled well. The helicopter has never been crashed and I do not fly 3D.
The pictures show the helicopter in its current ready to fly stage. NOT ALL ITEMS ARE INCLUDED WITH THE SALE PLEASE SEE THE LIST BELOW.
ITEMS INCLUDED WITH THE HELICOPTER….
TREX 700
YS91ST (2 gallon through it and the break-in was just finished )
Hatori SB-16 Todd Bennett special pipe
Youngblood 710 radix blades
Youngblood Stubz paddles (NIP and not pictured)
Switchglo remote igniter
2 sets of landing gear skids (NIP and not picutured)
1 set skid pipe (NIP and not pictured)
New torque tube (NIP and not pictured)
Youngblood swash leveler for the TREX 700
Original Align Governor (I used the magnets with the GV-1)
GV-1 magnetic pickup (I don’t want to remove it, 97% magnet pickup)
Custom carbon fiber radio tray
4-40 hardware for all servos
THE FOLLOWING ITEMS ARE NOT INCLUDED WITH THE SALE, I AM GOING TO REMOVE THEM ONCE THE HELICOPTER SELLS...X4 BLS451 SERVOS, 611 GYRO AND SERVO, GV-1 CONTROL AMP, THUNDER POWER BATTERY, SG REACTOR-X, AND RECEIVER.
There are a few flaws with the helicopter canopy. The canopy has a few light scratches (they are very minor). The canopy mounting holes were drilled incorrect and I needed to space out one of the mounting posts to keep the canopy from rubbing on the main gear. When the canopy is installed it has a slight bow in the middle. More of a visual bother than anything else. I did use 4-40 hardware to mount all the servos, the holes were drilled and tapped. I did not like the stock screws that were included. Other than that the helicopter is in near perfect, new condition!
I am asking $1350.00 OBO for all items included with the sale. I really do not want to ship but I will if need for the sale, buyer pays shipping. I will meet to up to the following places to help deliver, Tallahasse to the East, Mobile to the West, and Montgomery to the North. I don’t know what shipping would be but I can check into it. Probably in two boxes would be the best way. I prefer PayPal and will cover the fees for this sale. If you have any question please let me know, my phone is 850-525-8012.
This is my first post on this site but please check RR and helifreak for feedback and deal with confidence.
Free fuel if picked-up or delivery exchange.
I will also included 4 gallons of new fuel if the helicopter is picked-up or delivery exchage within the area specified obove. I will not ship the fuel unless the person/buyer wants to pay for the actually shipping charges. But I would include it with any shipped deal provided the buyer pays shipping and any fees for hazmat. $92.00 of free fuel.
I have 3 gallons of Wildcat 30% YB and 1 gallon of Coolpower 30% heliblend. The YS has been flown on the YB 30% so the motor is tuned for that fuel. The fuel has been stored indoors for the couple of moths I have had it.