RCE-BL35X ESC Help

[flyingbarry]

Hi All,

I have a T-Rex 450S GF with a RCE-BL35X ESC I am unable to work out how to set up this ECS. Can someone tell me how to setup this ECS to eliminate the slow, delayed start up?

Regards

Barry

[tommy boy]

you don't like the slow start?? that is a really nice feature of that esc!

have you had a thorough look through the manual (http://www.align.com.tw/html/en/assembly/rce-bl25xe.htm)

from what i've read there you have to use the soft start in helicopter 1 and helicopter 2. if you go to airplane mode, the start up would be faster, maybe too fast? you tried it?

looks like airplane status is OPTION 4, beep 1

[flyingbarry]

Thanks for the feedback TB but can you tell me what the meaning is of (1-1) or (2-2) etc?

Is this the TX throtle position inputs to re-set the RCE-BL35X ESC, see attached from the manual if this helps.

Regards

Barry

[Trex Pilot]

Thanks for the feedback TB but can you tell me what the meaning is of (1-1) or (2-2) etc?

Is this the TX throtle position inputs to re-set the RCE-BL35X ESC, see attached from the manual if this helps.

Regards

Barry
this will help you out, just watch the video and he will show you just what to do ;)
http://www.helifreak.com/showthread.php?t=41692