Need main blade shims. : (

[JayB]

I have a question. I sold my old bird to get a new Rex 700. Got the 700 all put together but just remembered that I let my main blade shims go when I sold the old airframe. Does anyone know where I might be able to get some? Tried a bunch of washers that were the same size but they are all too thick. Any ideas? Oh yeah I'm using Curtis blades.

[Trex Pilot]

I have a question. I sold my old bird to get a new Rex 700. Got the 700 all put together but just remembered that I let my main blade shims go when I sold the old airframe. Does anyone know where I might be able to get some? Tried a bunch of washers that were the same size but they are all too thick. Any ideas? Oh yeah I'm using Curtis blades.
you can try a plumbing store they have nylon washer's that would work great.

[Jaycab]

Jay B.
Take a credit card, draw two circles,(dime) drill the holes, trim with a barber sissors, shape it with 180 grit sand paper
or use a dremel with a med abrasive drum, install it & fly the S!@# out of it.

Jay

[Trex Pilot]

Jay B.
Take a credit card, draw two circles,(dime) drill the holes, trim with a barber sissors, shape it with 180 grit sand paper
or use a dremel with a med abrasive drum, install it & fly the S!@# out of it.

Jay
LOL:) that will work to

[JayB]

I rocked the cradit card trick!! Worked great thanks for the help!!! And now I dont have to worry about running up my credit card any more!!! Whoo hoo!!! Thanks guys.

[Jonathan Ott]

This is the only time credit cards are worth using. :)