molokaiboy
11-30-2010, 01:08 AM
I have a used Vibe 50 in good condition (6 gallons of flight time). Heli has had a hard landing from a botched auto resulting in the skids being broke, bent spindle, bent flybar, crack in the canopy, and one of the front canopy stand off bent the where it goes to the servo mount. I replaced the landing gear, flybar, spindle, repaired the stand off, replaced the main shaft just in case it got a little bent, replaced the tail output shaft just in case. Everything is stock except the tail blades, I put a pair of KBDD ones on.
OS50 Hyper has 4 gallons from the previous owner, I have run 2 gallons through it (Byron's RotorRage30%). One gallon with the ceramic bearings the previous owner had included when I bought it. Engine is strong and has never been run lean.
Align pipe has a crack near where it mounts to the engine, it has been repaired. It doesn't affect the performance of the pipe.
I have 3 Futaba 9451's on cyclic, a JR Z590M for throttle, Gy520 w/ JR 8900G, Align 600 mains.
This is PNP, add receiver, fuel and fly.
Vibe 50 Airframe - $325
3X 9451's - $150
Jr Z90M - $20
GY520 w/ 8900G - $180
Align 600mm - $40
KBDD Tail bades - $5
Align Pipe - $35
OS 50 Hyper w/ceramic bearings- $110
Total ................$865
That's almost 50% off if you were to purchase all this new.
I have an extra set of landing struts and skids, and a couple NIP flybars, and the original stock tail blades that I will also include. I would like to get $850 OBO, PP fees are included, FREE shipping if Sold at asking price!!. Tail boom will be disassembled for shipping. Will post pics soon or they can be emailed to you.
Possible trades include, Outrage 550, Align 550 Flybar/Flybarless, Align 600E Flybar/flybarless
Aloha and thank you for looking.
If you want just the airframe I'll let it go for $300 shipped to your door, add the hyper and pipe for $150 more shipped and fees included.
Will not separate till the airframe is gone. Check feedback on runryder.com, helifreak, rcuniverse.com, and rcgroups.com as "molokaiboy" and ebay as "molokai73"
Aloha,
Les
OS50 Hyper has 4 gallons from the previous owner, I have run 2 gallons through it (Byron's RotorRage30%). One gallon with the ceramic bearings the previous owner had included when I bought it. Engine is strong and has never been run lean.
Align pipe has a crack near where it mounts to the engine, it has been repaired. It doesn't affect the performance of the pipe.
I have 3 Futaba 9451's on cyclic, a JR Z590M for throttle, Gy520 w/ JR 8900G, Align 600 mains.
This is PNP, add receiver, fuel and fly.
Vibe 50 Airframe - $325
3X 9451's - $150
Jr Z90M - $20
GY520 w/ 8900G - $180
Align 600mm - $40
KBDD Tail bades - $5
Align Pipe - $35
OS 50 Hyper w/ceramic bearings- $110
Total ................$865
That's almost 50% off if you were to purchase all this new.
I have an extra set of landing struts and skids, and a couple NIP flybars, and the original stock tail blades that I will also include. I would like to get $850 OBO, PP fees are included, FREE shipping if Sold at asking price!!. Tail boom will be disassembled for shipping. Will post pics soon or they can be emailed to you.
Possible trades include, Outrage 550, Align 550 Flybar/Flybarless, Align 600E Flybar/flybarless
Aloha and thank you for looking.
If you want just the airframe I'll let it go for $300 shipped to your door, add the hyper and pipe for $150 more shipped and fees included.
Will not separate till the airframe is gone. Check feedback on runryder.com, helifreak, rcuniverse.com, and rcgroups.com as "molokaiboy" and ebay as "molokai73"
Aloha,
Les