A123 Cells (Dewalt) FS

[Skid_Slide]

I have a whole boat load of these guys left over. I bought a bunch for my Trex600 and never actually did anything with them. Now i do not fly my 600, so I'm selling these to get money for my next project.

They are all brancd new, they will all come with trimmed tabs (still plenty of meat to solder/weld to), and I always replace bad cells if you get them. No worries.

I will sell these at 9/cell or 85 for 10. Fleebay has them for 115+ and i already unboxed them for ya! :-)

Shipping varies on where your zip is. Mine is 78681.

Thanks for lookin!

[Kev the Rev]

Hi, do you ship to Australia?

[Skid_Slide]

How many were you looking for?

[Skid_Slide]

How bout 8/cell?

[zennnnn]

Question....

What is the mAh of the cells?
What is the charge current for the cells?
I am assuming I can use a lipo charger as long as I stay at the recommended current charge rate.

I am thinking about creating a 4-cell for a trex v2 equipped with Align 430XL and ESC that came with it.

Thanks in advance for your reply.

[Skid_Slide]

The cells are 2300 mah. You can charge them up to 10 amps. (or anything in between)

You cannot use a lipo charger if it does not have A123 charge settings. You can get converters out there, but i have no idea what/where they are.

4S on a Trex will work, but im not sure if your ESC will work.

Search out A123 on rcgroups for a good list of posts to research.

[JustinMoore12]

4s on a trex with the stock gear will be fine. Very heavy though.

[Cloud Cruiser]

Sorry!!

[Skid_Slide]

Got cleaned out! All gone! :clap: