toejab
04-05-2009, 07:43 PM
This is a NEW BUILD,never flown Vario Benzin Trainer 8300. It has never been spun up. The engine has only had an initial break in of idling for 10 minutes,followed by 15 minutes cool down...this was done 3 times...that is it! The electronics are all brand new for this build... I have FOUR benzins...one must go...so,here we go........
Vario G230rc engine with the Yellow button kill switch
JR 8101 SERVOS--(4.8 or 6 volt) X 4 (90.4 oz. of Torque)-Replace the 8101 servo that is on the throttle and have a great servo as a spare!
JR G500T gyro with JR 8700G tail servo
Gem 2000 battery monitor with large remote light
JR 1800mah sub c receiver pack
JR R777S receiver
Vario head and tail blades, 720mm mains
Metal tail gearbox with Torque tube drive
AIR STAR frames=no funky wooden servo tray up front that robs cabin space,so this is an excellant choice if a fuselage heli is in your future,lots of room for cock pit details!__and MOST IMPORTANTLY.... The air star frames give you a direct servo to swash control with out the slop of bellcranks or the unecesary extra ball links to fail. The servos mount in the frames right below the swash... = MAJOR IMPROVEMNET over stock Vario frames with the same thickness,strength,and quality..
********The total invested here is just over $3,000...I am looking to get in the neighborhood of $2,000.**REASONABLE offers entertained. POSTAL money order or PAYPAL...add fees,.sorry no trades,thanks.
********IF the purchaser would rather have a DURALITE set-up,that can be arranged for this same price,as i have an extra set-up with regulator and 4,000 mah duralite pack.
link to my ad on rr forum....see pix there,thanks
http://www.runryder.com/helicopter/t506097p1/
Vario G230rc engine with the Yellow button kill switch
JR 8101 SERVOS--(4.8 or 6 volt) X 4 (90.4 oz. of Torque)-Replace the 8101 servo that is on the throttle and have a great servo as a spare!
JR G500T gyro with JR 8700G tail servo
Gem 2000 battery monitor with large remote light
JR 1800mah sub c receiver pack
JR R777S receiver
Vario head and tail blades, 720mm mains
Metal tail gearbox with Torque tube drive
AIR STAR frames=no funky wooden servo tray up front that robs cabin space,so this is an excellant choice if a fuselage heli is in your future,lots of room for cock pit details!__and MOST IMPORTANTLY.... The air star frames give you a direct servo to swash control with out the slop of bellcranks or the unecesary extra ball links to fail. The servos mount in the frames right below the swash... = MAJOR IMPROVEMNET over stock Vario frames with the same thickness,strength,and quality..
********The total invested here is just over $3,000...I am looking to get in the neighborhood of $2,000.**REASONABLE offers entertained. POSTAL money order or PAYPAL...add fees,.sorry no trades,thanks.
********IF the purchaser would rather have a DURALITE set-up,that can be arranged for this same price,as i have an extra set-up with regulator and 4,000 mah duralite pack.
link to my ad on rr forum....see pix there,thanks
http://www.runryder.com/helicopter/t506097p1/