2.4Ghz TX and RX Corona system

[BigFoot7614]

Hello,

There is a low cost 2.4Ghz system for Futaba and Jr radios here :

http://www.bidproduct.com/part/Product_list_TRANSMITTER%20RECEIVER%20CRYSTAL_6.ht ml

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=7381

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=7380

Are you ready to test it with your heli ? ;)

By, Phil

[CSpaced]

I think I would try it in a foamy first :)

[ericb]

Save $$ on the 2.4 system = spend $$ on a new heli.

[BigFoot7614]

Hello,

I start to fly with this system last week : with a foamy Yak 54 Ikarus. :p

More results soon !

By, Phil

[CSpaced]

Hello,

I start to fly with this system last week : with a foamy Yak 54 Ikarus. :p

More results soon !

By, Phil

Great minds think alike! :cool:

[BigFoot7614]

Hello,

Test results with a Futaba 9Zap : some glitches ( very very shorts ). It's possible to fly to your limits of vision.

About glitches : i test the system with 3 Brushless esc ( Castle Fenix 10, Turnigy 10A 2A bec and a chinese copy of Castle ). Its possible to fly with 3 packs without glitches and you dont know why after it's start to have some very shorts glitches or you have some glitches at the first pack. :mad:

For a parkflyer or a shocky it's a good low cost product. For an expensive heli...:confused: be carefull with the carbon parts !

By Phil

[CSpaced]

Thanks for sharing your results, sounds like its good for park flyer type stuff.

[BigFoot7614]

Hello,

I try to reduce the glitches with capacitors ( like for Spektrum receivers ) and aluminium coating.

By, Phil

[hoppy]

Will these work with a HiTec Spectrum?

[BigFoot7614]

Hello,

For Hoppy : the Corona System can only work with a Corona 2.4Ghz receiver. Sorry !

I will receive a new Rx and Tx modul combo from the factory in few days. My system is fautly (first batch with some glitches).
The Corona Sales Department is very reactive and easy to contact. :)
Well, i will give you the results of the tests in few days.

By Phil

[John Kim]

Hello,

Test results with a Futaba 9Zap : some glitches ( very very shorts ). It's possible to fly to your limits of vision.

About glitches : i test the system with 3 Brushless esc ( Castle Fenix 10, Turnigy 10A 2A bec and a chinese copy of Castle ). Its possible to fly with 3 packs without glitches and you dont know why after it's start to have some very shorts glitches or you have some glitches at the first pack. :mad:

For a parkflyer or a shocky it's a good low cost product. For an expensive heli...:confused: be carefull with the carbon parts !

By Phil

Your glitches may be caused by electronic noise generated by motor and ESC. It is important to remember that 2.4 receivers are not immune to internally generated noise although it may reject air wave noise.

Try on non-electric planes and results may be different.